POM Wear-Resistant Plastic Pipe Hose Tube Production Extrusion Line
This PE Foam Pipe/Tube/Rod Extruder Machine can produce EPE foam
tube/pipe/rod/stick, which is a kind of new type foaming material
and widely used as the air conditioner tube sheath, pool noodle,
toy guardrail, etc due to its good foaming, elasticity and heat
preservation character.
- Single screw extruder Single screw extruder is design especially
for PE material. with different capacity for choice.
- Vacuum calibration tank It is 6m length. with vacuum pump and water
pump.
- Water spray cooling tank It is 6m, which is for cooling PE pipes.
- Haul-offs Caterpillars haul-offs, with KAF reducers, which works
more stably
- Cutting machine It is adopts planetary cutting , which is suitable
to cut PE pipes. with different diameter clamps.
Machine Parameter:
| No | Model | Details |
| 1 | Hopper Dryer | - Material : Stainless Steel
Heating Power : 6KW - Fan Power : 0.37KW
- Hopper Volume : 150KG/H
|
| 2 | SJ30 Single Screw Plastic Extruder | l Screw Diameter :￠30mm l Ratio of L/D : 28:1 l Screw Maximum Rotating Speed : 15-150Rpm l Motor Power : 7.5KW l Screw and Barrel Material : 38CrMoAlA Nitrogen Treatment l Depth of Nitrogen Treatment: 0.4-0.7 l Screw Straightness : ＜0.015 mm l Hardness of Screw : HV800-1000 l Heating Method : Casting Aluminum Heater l Heating Zones : 4Periods(Screw Barrel 3periods,Head Piece 1
Periods) l Heating Power:12KW l Cooling Method :Forced Air Cool l Cooling Zones :3 periods l Fan Motor Power : 180W*3= 0.54KW l Electrical System : ABB Frequency Converter l Temperature Control Meter : RKC l Gear Box : Hard Tooth Face l Central Height : 1000mm l Size : 1500*1090*2127mm l Weight : 400kg
|
| 3 | Mold and Head | - Mold Material : Steel 40Cr
- Mold Size for OD10mm, ID 8.5mm tube Connection head material : 45#
carton steel
c |
| 4 | Vacuum and Water cooling tank | - Vacuum forming part : Length: 2m
- Vacuum pump power : 2.2kw
- Material: stainless steel
- Heating device for good quality pipe forming
- Water cooling tank parts :
- Length : 1m
- Material : stainless steel
- Machine structure material : Q235 steel
- (height and direction adjustable)
- Size : 3000*1120*310
|
5
| Haul off with cutting device | - Haul off speed : 1-15m/min or required
- Driving motor : 0.55kw*2
- Cutter motor type : servo motor
- Motor power: 1.5kw
- Cutter blade material : high quality tooling steel
- Final tube cutting length could be adjusted
- Cutting tube number could be seen in PLC system
- Control system ( PLC control system )
- Size : 1500*900*850
|
Pre-sales service:
> Introducing in detail features and application of the products
to customer
> Selecting economical and practical machine & equipment for
customer
> Providing operation data of the related machine & equipment
> Providing means of trial performance for customer
Sales service:
> Recommending engineering conditions required for installation
of the machine & equipment
> Communicating in time the manufacturing progress of the
machine with user
> Providing assistance in technical conditions, screw
combination and barrel disposition needed for product
After-sales service:
> Providing on-the-spot technical assistance in installation,
commission and training
> Filling in detail customer’s information
> Providing long-term maintenance service and spare parts
> Giving technical support to customer for developing new
product
> Providing free maintenance for a year
